SOYER Stud Welding Machine ( BMS-8NV )
RM21,000.00
The performance and quality features of the BMS-8NV SOYER stud welder are unequalled in stud welding technology. The lightweight stud welder in compact design allows the safe and problem-free welding of studs up to M10. This stud welder with microprocessor control is a top-quality product meeting highest requirements due to operating convenience and absolute safety. One of the remarkable features of the BMS-8NV stud welder is its very favourable price/efficiency ratio.
| Welding Range | M3-M10 or 3-9mm for studs made of steel and stainless steel, M8 or 8 for studs made of aluminium and brass |
| Welding process | Capacitor discharge process ( TS ) as per EN ISO 14555 |
| Standard gun | PS-1k Positioning welding gun or PS-3k with support attachment |
| Power source | Capacitor battery |
| Chaarging capacity | 99,000 uf |
| Charging voltage | 50-220v, infinitely variable up/down |
| Welding time | 0.001-0.003 seconds |
| Welding sequence | Up to 20 studs/min , depending on stud diameter |
| Mains supply | 115/230V 50/60 Hz 10 A |
| Dimensions | 300 x 120 x 320mm ( W x H X D ) |
| Weight | 10 kg |
WHAT IS STUD WELDING?
Stud welding allows metal fasteners such as weld studs, weld pins and tapped studs, to be welded onto another metal object using an arc at lightning speed. An arc is produced between the end of the stud and the surface of the workpiece, melting both parts. The stud is then forged into the molten pool. The material solidifies and the stud is welded. The weld is uniform and has complete fusion across the flange. As the whole surface of the weld stud is joined with the workpiece, the resulting weld joint is stronger than the stud or parent material.
Since no holes are punched in the sheet, the workpiece is not weakened and corrosion problems are minimized. When welding the stud, access is only required from one side which means that component handling is considerably facilitated, especially as regards establishing an earth connection.
This absolutely leakproof, hole-free and decorative joining technique is used in many everyday objects and facilitates their handling. Be it coffee machines, cooking pots, flat irons, steam cookers or even in vehicles and roofing – many things would be impossible without stud welding.
With the development of the patented “SRM Technology®” procedure (patent no. 10 2004 051 389) it has even been possible to replace many areas of glueing, riveting, punching and drilling.
ADVANTAGES:
Wide range of use from Ø 2 mm up to Ø 25 mm
Complete fusion, hence high strength
Weldable even on thin sheet metal
No or only very little reverse marking
No changes in material such as deformation or distortion
No drill holes required, hence no leaking
Corrosion problems can be minimized
Access to parts only required from one side
Various material combinations possible
No time and cost consuming preparatory and finishing works necessary
Fast and easy operation ensure high productivity
Can be easily automated with standard weld studs
DETAILS OF SRM STUD WELDING
WITH A ROTATING MAGNETIC FIELD
The patented stud welding process in the radial symmetrical magnetic field (patent no.: 10 2004 051 389) in conjunction with the innovative HZ-1 universal weld stud featuring a plane end face and centring tip enables the safe and clean welding of weld studs up to M16. In this process, the use of ceramic rings is no longer needed.
This procedure opens up whole new possibilities especially in automated stud welding plants and large-scale component production.
