TELWIN Inverter MMA TIG Welding Machine – TECHNOLOGY 236 XT
MMA & TIG Inverter Welding Machine
XT welds all types of electrodes, rutile, basic, stainless steel, cast iron and (model 238) even cellulose and in aluminium. It guarantees excellent performance with power supply from a motor generator with voltage variations +/- 15%. It also welds in TIG with DC and scratch start, or with DC and LIFT start (Advance model).
Model: TECHNOLOGY 236 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc.
Recommended for motorgenerators, this model grants high performance despite power supply instability, thanks to the MPGE (Multi Protection for MotorGenerator) multiprotections: control device of the wave form, filter against input peaks, stabilization of oscillations. Robust and impact resistant.
- compact and light
- 50 Ø dinse
- high welding current stability in spite of mains voltage fluctuations
- arc force, hot start and anti-stick devices
- thermostatic, overvoltage, undervoltage, overcurrent, motorgenerator (+/- 15%) protections.
Complete with MMA weldng accessories and aluminium carry case.
|MODEL||TECHNOLOGY 236 XT (816251)|
|Single phase main voltage||230 V|
|Main frequency||50 / 60 Hz|
|Current range||5 – 200 A|
|Max current||200 A – 35%|
|Current at 60%||140 A|
|Max no load voltage||60 V|
|Max absorbed current||38 A|
|Absorbed current at 60%||22 A|
|Max absorbed power||6 kW|
|Absorbed power at 60%||3.3 kW|
|Motorgenerator minimum power||10 kW|
|Power factor (cosphi)||0.7|
|Usable electrodes in DC||1.6 – 4 mm|
|Protection degree||IP 23|
|Dimension||37.5 × 50 × 22 cm|