Comeup Heavy Duty Winch CWG-30375

  • Electromagnetic spring-applied failsafe brake
  • Heavy duty high efficiency ball bearing on all running surfaces
  • Planetary gears for maximum mechanical efficiency
  • Cast steel foot mountings
  • Fabricated steel drum
  • Supplied on steel base plate ready to mount
  • Rated capacity limiter limits driving power of the motor to prevent overloading of the winch
  • Quiet running
  • Low voltage control ass’y comes as standard
  • Emergency stop function switch is available upon request

Standard Accessories
  • Wire rope 10mm × 60m with safety-latch hook
  • Low voltage control ass’y LV-320
    • Remote control CPB-161
      • Switch cord 1.25mm2 × 3C × 3m
      • Pendant switch CPB-161
    • Low voltage control, LV-320
  • Base plate

Optional Accessories
  • Low voltage control ass’y LV-320
    • Remote control PB-306
      • Switch cord 1.25mm2 × 3C × 3m
      • Pendant switch PB-306 with an emergency stop button
    • Low voltage control, LV-320
material handling equipment


Lifting capacity900 kg at wire rope top layer
Lifting speed13 – 20.6 m/min
Power source 3 phase, 380-440V
Motor rating IP443.8 kw x 4 poles induction brake motor
Gear ratio 48:1
Maximum lifting height58 m
Braking methodsElectromagnetic
Wire rope10 mm x 60 m
Drum length230 mm
Drum diameter127 mm
Drum flange diameter275 mm
Mounting bolts pattern500 mm x 370 mm
Net weight185 kg
Gross Weight220kg

Lifting Capacity, Lifting Speed and Rope Capacity:

Note:.Above performance ratings are based on 50Hz supply

Pulling Load Capacity for Various Inclines in kg

1. All rating are based on the top layer. For each layer reduction on the drum pulling capacity is increased by 10%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%
3. The pulling capacities are based on a pulling load and 15% has been allowed for friction (specific applications will vary)

The winch is not intended to be used in any manner for the movement or lifting of personnel. 
The rated lifting capacity shown is based on the top rope layer on the drum 
The rope winding on the drum shall remain 5 wraps from the drum

Dimension, mm/in: