CACTUS Hydraulic Knockout Punch Driver SKP-C51
Description:
●The hose makes it easy to punch holes at any position
●A wide variety usage of punching for switchboards,control panels,and engineering work of electric installation,plumbing, and other installation work for steel hole-punching
●Being set with the light and compact hand-operated by Hydraulic Pump(CP-3) works even more efficiently
●Hand operated lightweight punch driver to knockout steel plate up to 3.2mm and stainless steel plate up to 1.6mm.
Specification:
Plate Thickness : 3.2mm (steel)
1.6mm (stainless steel)
Max. Output : 8 metric ton
Pressure : 500 kg/cm²
Weight (with pump/without dies) : 12 kg
Model | Hand Operated Hydraulic Pump CP-3(with hose) |
Cylinder SCR-225 | Bolt | Sleeve | Punch and Die |
SKP-C51 | set | 1set | 3/8・3/4 each 1ea |
Large,Middle,small each1ea |
19・25・31・39・51 }5sets |
■Hand-Operated Hyraulic Pump(CP-3)
Max. Pressure Map(kfg/cm2) | 49(500) |
Oiltank Capacity(ml) | 250 |
Hose Length(m) | 0.8 |
Length(mm) | 370 |
Weight(kg) | 4(Including hose) |
■Clyinder(CSR-225)
Max.Output kN (tonf) | 78(8) |
Max.Stroke(mm) | 25 |
External Diameter x Length(mm) | 72×140 |
Weight(kg) | 2.5 |
※Capacity : soft steel sheet Max, 3.2mm
stainless sheet Max,1.6mm

■Standard Round Punch and Die Size
For thin Wall Conduit(mm) | For Thin Wall Conduit(mm) | For thin Wall conduit(mm) | For Thick Wall Conduit(mm) | For Thick Wall Conduit(mm) | For Thick Wall Conduit(mm) |
Conduit Size | Punching Diameter | Bolt | Conduit Size | Punching Diamter | Bolt |
15 | 16.8 | 3/8 | 16 | 21.9 | 3/8 |
19 | 20.0 | 3/8 | 22 | 27.4 | 3/4 |
25 | 26.3 | 3/8 | 28 | 34.2 | 3/4 |
31 | 32.7 | 3/4 | 36 | 42.8 | 3/4 |
39 | 39.0 | 3/4 | 42 | 48.7 | 3/4 |
51 | 51.7 | 3/4 | 54 | 60.5 | 3/4 |
63 | 64.4 | 3/4 | 70 | 76.0 | 3/4 |
75 | 771 | 3/4 | 82 | 88.8 | 3/4 |
92 | 102.5 | 3/4 | |||
104 | 115.2 | 3/4 |
■Standard Square Punch Cutter Size
Standard (with Bolt/Nut) | Standard (with Bolt/Nut) | Standard (with Bolt/Nut) |
20×20 | 40×40 | 60×60 |
25×25 | 45×45 | 65×65 |
30×30 | 50×50 | 70×70 |
35×35 | 55×55 | 75×75 |
Round Actual Punch and Die size
●Available from φ15 to φ19 by every 1mm
●Round Punch and Die Max.φ120 can be made on request
●Square Punch and Die Max.Cacapacity(105×105)
●Rectangle can be made on request